Alcatel-Lucent 6850-48 Reference Guide

IPX Commands

page 38-14

OmniSwitch CLI Reference Guide

OmniSwitch 6400, 6850, 6855, 9000

• Use the no form of this command to delete a SAP filter.

• To apply a global filter, use only the basic command syntax (e.g., ipx filter sap all in allow). Do not 

enter the optional vlan, network, network_mask, network_node, or node_mask parameters.

• If you do not enter a network number, the filter will be applied to all networks.

• If you do not enter a node number, the filter will be applied to all nodes of the specified network.

• The network node number is the physical address assigned to the interface board that connects the 

device to the network. 

-> ipx filter sap 0004 in block

Release 6.1; command was introduced.

0

00000000

ffffffff

00:00:00:00:00:00

00:00:00:00:00:00

Displays the current IPX RIP, SAP, and GNS filters.