Alcatel-Lucent 6850-48 Reference Guide

IPX Commands

OmniSwitch CLI Reference Guide

page 38-17

OmniSwitch 6400, 6850, 6855, 9000

• Use the no form of this command to delete a GNS filter.

• To apply a global filter, use only the basic command syntax (e.g., ipx filter gns all allow). Do not 

enter the optional vlan, network, network_mask, network_node, or node_mask parameters.

• If you do not enter a network number, the filter will be applied to all networks.

• If you do not enter a node number, the filter will be applied to all nodes of the specified network.

• The network node number is the physical address assigned to the interface board that connects the 

device to the network.

-> ipx filter gns all block

Release 6.1; command was introduced.

alaIpxRipSapFilterTable

alaIpxRipSapFilterVlanId

alaIpxRipSapFilterType

alaIpxRipSapFilterNet

alaIpxRipSapFilterNetMask

alaIpxRipSapFilterNode

alaIpxRipSapFilterNodeMask

alaIpxRipSapFilterSvcType

alaIpxRipSapFilterMode

alaIpxRipSapFilterRowStatus

Displays the current IPX RIP and SAP filters.