Alcatel-Lucent 6850-48 Reference Guide
VRRP Commands
page 40-36
OmniSwitch CLI Reference Guide
September 2009
show vrrp
Displays the virtual router configuration for all virtual routers or for a specific virtual router.
show vrrp [vrid]
Syntax Definitions
vrid
The virtual router ID, in the range from 1–255.
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
Use the show vrrp command to display information about configuration parameters, which may be set
through the vrrp command. Use the show vrrp statistics command to get information about VRRP pack-
ets.
through the vrrp command. Use the show vrrp statistics command to get information about VRRP pack-
ets.
Examples
The following is an example of the output display on an OmniSwitch 6800:
-> show vrrp
VRRP trap generation: Enabled
VRRP startup delay: 75
IP
Admin
Adv.
VRID
VLAN
Address(es)
Status
Priority
Preempt
Interval
----+ ----+ -------------+----------+----------+----------+---------
1
1
192.168.170.1
Enabled
255
Yes
1
192.168.170.2
2
15
10.2.25.254
Disabled
100
No
1
The following is an example of the output display on an OmniSwitch 6850, 6855, and 9000:
-> show vrrp
VRRP default advertisement interval: 5 seconds
VRRP default priority: 99
VRRP default preempt: No
VRRP trap generation: Enabled
VRRP startup delay: 45 (expired)
IP Admin Adv.
VRID VLAN Address(es) Status Priority Preempt Interval
----+----+---------------+--------+--------+-------+--------
1 101 192.60.245.240 Enabled 99 No 5
2 102 192.60.246.240 Enabled 99 No 5