Alcatel-Lucent 6850-48 Reference Guide
OSPF Commands
OmniSwitch CLI Reference Guide
September 2009
page 41-45
ip ospf interface transit-delay
Configures the OSPF interface transit delay.
ip ospf interface {interface_name} transit-delay seconds
Syntax Definitions
interface_name
The name of the interface.
seconds
The transit delay, in seconds. The valid range is 0–3600.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
The estimated number of seconds required to transmit a link state update over this interface. This
command takes into account transmission and propagation delays and must be greater than 0.
command takes into account transmission and propagation delays and must be greater than 0.
Examples
-> ip ospf interface vlan-101 transit-delay 100
Release History
Release 6.1; command was introduced.
Release 6.2.1; ip_address parameter deprecated.
Release 6.2.1; ip_address parameter deprecated.
Related Commands
MIB Objects
ospfIfTable
ospfIfTransitDelay
parameter
default
seconds
1
Displays the status and statistics of an OSPF interface.