Alcatel-Lucent 6850-48 Reference Guide
OSPF Commands
OmniSwitch CLI Reference Guide
September 2009
page 41-75
Release History
Release 6.1; command was introduced.
Related Commands
output definitions
Area Identifier
The unique 32-bit value, such as IP address, that identifies the OSPF
area in the AS.
area in the AS.
Admin Status
Whether the area is enabled or disabled.
Operational Status
Whether the area is active.
Area Type
The area type. This field will be normal, stub, or NSSA.
Area Summary
Whether Area Summary is enabled or disabled.
Time since last SPF Run
The last time the Shortest Path First calculation was performed.
# of Area Border Routers
known
known
The number of Area Border Routers in the area.
# of AS Border Routers known The number of Autonomous System Border Routers in the area.
# of LSAs
The total number of Link State Advertisements for the Area.
# of SPF Calculations
The number of times the area has calculated the Shortest Path.
# of Incremental SPF Calcula-
tions
tions
The number of incremental Shortest Path First calculations that have
been performed in the area.
been performed in the area.
# of Neighbors in Init State
The number of OSPF neighbors that are in initialization.
# of Neighbors in 2-Way State
The number of OSPF 2-way state neighbors in this area.
# of Neighbors in Exchange
State
State
The number of OSPF neighbors that are currently establishing their sta-
tus.
tus.
# of Neighbors in Full State
The number of OSPF neighbors.
# of Interfaces attached
The number of OSPF interfaces.
Attached Interfaces
The names of the OSPF interfaces attached to this area. This field is not
displayed on OmniSwitch 6800 Series switches.
displayed on OmniSwitch 6800 Series switches.
Creates or deletes an OSPF area, assigning default metric, cost, and
type.
type.
Creates a route summarization instance whereby a range of
addresses will be advertised as a single route.
addresses will be advertised as a single route.
Displays OSPF interface information.