Alcatel-Lucent 6850-48 Reference Guide
Network Time Protocol Commands
page 5-28
OmniSwitch CLI Reference Guide
September 2009
show ntp server client-list
Displays the information about the current NTP clients connected to the server.
show ntp server client-list
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Use this command to display the tabular information on the current NTP client connected to the server
(switch).
(switch).
Examples
-> show ntp server client-list
IP Address Ver Key
------------------+-------+----------
172.23.0.201 4 0
10.255.24.121 4 0
Release History
Release 6.4.2; command was introduced.
output definitions
IP Address
The client IP address.
Ver
The version of NTP the server is using. Versions 3 and 4 are valid.
Key
The NTP server’s public key. This must be accurate and the same as the
NTP server or the client switch will not be able to synchronize with the
NTP server. A zero (0) means there is no key entered.
NTP server or the client switch will not be able to synchronize with the
NTP server. A zero (0) means there is no key entered.