Alcatel-Lucent 6850-48 Reference Guide
OSPFv3 Commands
page 42-42
OmniSwitch CLI Reference Guide
September 2009
show ipv6 ospf interface
Displays OSPFv3 interface information.
show ipv6 ospf interface [interface_name]
Syntax Definitions
interface_name
The name of the interface.
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
Not specifying the interface name displays all known interfaces for the OSPFv3 router.
Examples
-> show ipv6 ospf interface
Admin Oper
Name DR Router ID BDR Router ID Status Status State
----------+----------------+---------------+----------+---------+---------
vlan-2071 5.5.5.5 0.0.0.0 Enabled Up DR
vlan-2055 7.7.7.7 5.5.5.5 Enabled Up BDR
vlan-2056 7.7.7.7 5.5.5.5 Enabled Up BDR
output definitions
Name
The name of the interface.
DR Router ID
The designated router address on this network segment. Make sure you
configure a VLAN for the router IP. (See
configure a VLAN for the router IP. (See
for more information.)
BDR Router ID
The IP address of the backup designated router.
Vlan
The VLAN to which the interface is assigned.
Admin Status
The current administration status of the interface, either enabled or
disabled.
disabled.
Oper Status
Indicates whether the interface is an active OSPF interface.
State
The current state of the OSPF interface. It will be DR, BDR, other.