Alcatel-Lucent 6850-48 Reference Guide

IS-IS Commands

page 43-6

OmniSwitch CLI Reference Guide

Configures the area ID for the switch.

ip isis area-id area address

no ip isis area-id area address

1–13 byte variable length integer, which specifies the area address.

N/A

OmniSwitch 6850, 9000, 9000E

• Use the no form of this command to remove the area ID.

• The area ID is part of the Network Service Access Point (NSAP) address.

• Other parts of NSAP address (system ID and selector ID) are not configurable. System ID is derived 

from router ID and selector ID remains always as 00.

• You can configure a maximum of three area addresses.

-> ip isis area-id 49.0001

-> no ip isis area-id 49.0001

Release 6.2.1; command was introduced.
Release 6.3.1; support for OmniSwitch 9000 added.

isisManAreaAddrTable

isisManAreaAddrExistState

Displays the IS-IS status.