Alcatel-Lucent 6850-48 Reference Guide

IS-IS Commands

page 43-30

OmniSwitch CLI Reference Guide

• If the encrypt-key parameter is used to configure the password through the CLI, then its value should 

be the same as the one that appears in the configuration snapshot. Only valid system generated values 
are accepted as encrypt-key. 

• This command overrides the global configuration of IS-IS authentication type.

• This command also sets the password or hash-key according to the type of authentication. 

• By default, the authentication is disabled and no authentication type is configured. 

-> ip isis level 2 auth-type simple key rachel

-> ip isis level 2 auth-type md5 encrypt-key 7a1e441a014b4030

Release 6.2.1; command was introduced.
Release 6.3.1; support for OmniSwitch 9000 added; key and encrypt-key parameters were added.

vRtrIsisLevelTable

vRtrIsisLevelAuthType

vRtrIsisLevelAuthKey

Enables authentication and configures the authentication type of IS-
IS protocol globally.

Displays the IS-IS status.