Alcatel-Lucent 6850-48 Reference Guide
IS-IS Commands
page 43-36
OmniSwitch CLI Reference Guide
September 2009
-> show ip isis adjacency detail
=========================================================================
ISIS adjacency
=========================================================================
-------------------------------------------------------------------------
SystemID : 1720.2116.0051 SNPA : 00:d0:95:f3:0f:08
Interface : vlan2 Up Time : SUN OCT 01 05:18:51 2006
State : UP Priority : 64
Nbr Sys Type : L2 L.CircType : L1L2
Hold Time : 6 Max Hold : 9
Adj Level : L2 Host-name : kite-2
IPv4 Neighbor : 2.2.2.3
Restart Support : Disabled
Restart Status : Not currently being helped
Restart Suppressed : Disabled
-------------------------------------------------------------------------
SystemID : 172.2116.0052 SNPA : 00:d0:95:f3:0f:08
Interface : vlan2 Up Time : SUN OCT 01 05:18:51 2006
State : UP Priority : 64
Nbr Sys Type : L1 L.CircType : L1L2
Hold Time : 6 Max Hold : 9Adj Level : L2IPv4
Neighbor : 2.2.2.3
Restart Support : Disabled
Restart Status : Not currently being helped
Restart Suppressed : Disabled
-------------------------------------------------------------------------
Adjacency : 2
=========================================================================
Host-name
The hostname of the adjacent router.
Adjacencies
The total number of adjacent routers.
output definitions
SystemID
The system ID of the adjacent router. The system ID is a fixed size, six
octet field in the NSAP. In an IS-IS routing domain, each router is iden-
tified by a 6-octet hexadecimal system ID.
octet field in the NSAP. In an IS-IS routing domain, each router is iden-
tified by a 6-octet hexadecimal system ID.
Interface
The interface name of the adjacent router.
State
The state of the adjacent router (Up or Down).
Adj Level
The adjacency level (L1 or L2) of the router.
Nbr Sys Type
The type of the neighboring router(L1, L2 or L1L2)
Hold Time
The Hold time of the adjacent router.
IPv4 Neighbor
The 32-bit IP address of the neighbor.
Restart Support
Indicates if graceful restart is enabled or disabled.
Restart Status
Indicates whether the router is currently helping an adjacent router to
restart.
restart.
Restart Suppressed
Indicates whether the advertisement of LSPs are suppressed
(
(
enabled
) or not (
disabled
) as per the request of adjacent router.
SNPA
The SNPA address of the adjacent router.
Up Time
Indicates the time period in seconds, during which the router was in the
adjacency.
adjacency.
output definitions