Alcatel-Lucent 6850-48 Reference Guide
BGP Commands
page 44-200
OmniSwitch CLI Reference Guide
September 2009
Path protocol
The protocol from which this route path was learned. Possible values
for this field are as follows: local, static, directhost, rip, ospf, isis,
ibgp, ebgp, and other.
for this field are as follows: local, static, directhost, rip, ospf, isis,
ibgp, ebgp, and other.
Path neighbor
The IPv6 address of the BGP peer.
Path nextHop
The next hop along the route path.
Path origin
The BGP origin attribute. Possible values will be igp, egp, incomplete,
and none. The origin attribute is considered during the route decision
process.
and none. The origin attribute is considered during the route decision
process.
Path local preference
The local preference value for this route as received in an UPDATE
message. A negative value (for example, the -1 in the above display)
indicates that the local preference value is missing for this route path.
message. A negative value (for example, the -1 in the above display)
indicates that the local preference value is missing for this route path.
Path state
Indicates the state of the path.The possible states are best, feasible, pol-
icy-wait, un-synchronized, dampened, or none. When path state is
none, it indicates that there are no paths to this prefix and the route is
being purged from the system.
icy-wait, un-synchronized, dampened, or none. When path state is
none, it indicates that there are no paths to this prefix and the route is
being purged from the system.
Path weight
The path weight as assigned through inbound and outbound policies.
Path preference degree
The local preference assigned to this route through an inbound or out-
bound policy, or, if the local preference value is missing, the default
local preference (which is assigned through the
bound policy, or, if the local preference value is missing, the default
local preference (which is assigned through the
).
Path autonomous systems
The AS path for this route. These numbers show the ASs through which
the route has traversed with the most recent AS listed first. In the above
example, this route began its path in AS 2 and then traveled through AS
3.
the route has traversed with the most recent AS listed first. In the above
example, this route began its path in AS 2 and then traveled through AS
3.
Path MED
The multi-exit discriminator (MED) value for this route path. A nega-
tive value (for example, the -1 in the above display) indicates that the
MED value is missing for this route path.
tive value (for example, the -1 in the above display) indicates that the
MED value is missing for this route path.
Path atomic
Indicates whether the ATOMIC-AGGREGATE attribute has been set
for this route. When set (this field would read yes), this attribute indi-
cates that an aggregate has caused a loss of information for this route (a
less specific route was chosen over a more specific route included in
the aggregate).
for this route. When set (this field would read yes), this attribute indi-
cates that an aggregate has caused a loss of information for this route (a
less specific route was chosen over a more specific route included in
the aggregate).
Path AS aggregator
Part of the AGGREGATOR attribute. This field indicates the AS for
the BGP speaker that created the aggregate. A value of <none> indi-
cates this is not an aggregate route.
the BGP speaker that created the aggregate. A value of <none> indi-
cates this is not an aggregate route.
Path IPaddr aggregator
Part of the AGGREGATOR attribute. This field indicates the IP
address for the BGP speaker that created the aggregate. A value of
<none> indicates that this is not an aggregate route.
address for the BGP speaker that created the aggregate. A value of
<none> indicates that this is not an aggregate route.
Path community
Indicates the community to which this route path belongs, if applicable.
A value of <none> indicates that this route does not belong to a com-
munity.
A value of <none> indicates that this route does not belong to a com-
munity.
Path Originator Id
The Router Id of the BGP4 speaker that performed route reflection
output definitions (continued)