Alcatel-Lucent 6850-48 Reference Guide
PIM Commands
OmniSwitch CLI Reference Guide
September 2009
page 45-5
ip pim sparse status
Globally enables or disables PIM-SM protocol on the switch.
ip pim sparse status {enable | disable}
Syntax Definitions
enable
Globally enables PIM-SM on the switch.
disable
Globally disables PIM-SM on the switch.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• This command must be set to enable before PIM-SM can run on the switch. In addition, the ip load
pim command must be executed. Refer to
for more information.
• The advanced routing image must be loaded to flash before the feature will start to work on the switch.
Examples
-> ip pim sparse status enable
-> ip pim sparse status disable
Release History
Release 6.1.1; command was introduced.
Related Commands
MIB Objects
alaPimsmGlobalConfig
alaPimsmAdminStatus
parameter
default
enable | disable
disable
Enables or disables the PIM protocol on a specific interface.
Dynamically loads PIM to memory.
Displays the status of the various global parameters for the PIM
sparse mode.
sparse mode.