Alcatel-Lucent 6850-48 Reference Guide
PIM Commands
page 45-38
OmniSwitch CLI Reference Guide
September 2009
Release History
Release 6.1.1; command was introduced.
Release 6.3.1; Keepalive Period field added; BSR Address, BSR Expiry Time, CBSR Address, CBSR
Priority, CBSR Mask Length, CRP Address, CRP Hold Time, CRP Expiry Time, CRP Interval, CRP
Priority, Data Timeout, and Join/Prune Interval fields removed.
Release 6.3.1; Keepalive Period field added; BSR Address, BSR Expiry Time, CBSR Address, CBSR
Priority, CBSR Mask Length, CRP Address, CRP Hold Time, CRP Expiry Time, CRP Interval, CRP
Priority, Data Timeout, and Join/Prune Interval fields removed.
output definitions
Status
The current global (i.e., switch-wide) status of PIM-SM. Options
include enabled and disabled.
include enabled and disabled.
Keepalive Period
The duration of the Keepalive timer. The default value is 210.
Max RPs
The maximum number of Rendezvous Points (RPs) allowed in the
PIM-SM domain (1–100). The default value is 32.
PIM-SM domain (1–100). The default value is 32.
Probe Time
The amount of time before the Register Suppression timer expires, at
which point the Designated Router (DR) sends a Null Register message
to the Rendezvous Point (RP). This allows the RP to refresh the Regis-
ter-Stop. If the Register Suppression timer expires, the DR will resume
encapsulating packets from the source to the RP. Values may range
from 1 to 300. The default value is 5.
which point the Designated Router (DR) sends a Null Register message
to the Rendezvous Point (RP). This allows the RP to refresh the Regis-
ter-Stop. If the Register Suppression timer expires, the DR will resume
encapsulating packets from the source to the RP. Values may range
from 1 to 300. The default value is 5.
Register Checksum
The current application of the checksum function on register messages
in the domain. Options include header and full. The default setting is
header.
in the domain. Options include header and full. The default setting is
header.
Register Suppress Timeout
The amount of time, in seconds, the Designated Router (DR) will stop
sending registers to the Rendezvous Point (RP) once a Register-Stop is
received (1–300). The default value is 60.
sending registers to the Rendezvous Point (RP) once a Register-Stop is
received (1–300). The default value is 60.
RP Threshold
Displays the current RP data rate threshold. This value indicates the
rate, in bits per second (bps), at which the Rendezvous Point (RP) will
attempt to switch to native forwarding by issuing an (S, G) Join mes-
sage toward the source. Values may range from 0 to 2147483647. The
default value is 1. A value of 0 indicates that the feature is currently dis-
abled.
rate, in bits per second (bps), at which the Rendezvous Point (RP) will
attempt to switch to native forwarding by issuing an (S, G) Join mes-
sage toward the source. Values may range from 0 to 2147483647. The
default value is 1. A value of 0 indicates that the feature is currently dis-
abled.
SPT Status
The current status of last hop Designated Router (DR) switching to the
Shortest Path Tree (SPT). Options include enabled and disabled.
The default setting is enabled.
Shortest Path Tree (SPT). Options include enabled and disabled.
The default setting is enabled.