Manualsbrain.com
  1. Manuals
  2. Brands
  3. Alcatel-Lucent
  4. 6850-48
  5. Reference Guide

Alcatel-Lucent 6850-48 Reference Guide

Download
Page of 3444
PIM Commands
page 45-76
OmniSwitch CLI Reference Guide
September 2009
ipv6 pim dense status
Enables or disables the IPv6 PIM-DM (dense mode) globally for IPv6.
ipv6 pim dense status {enable | disable}
Syntax Definitions
enable
Enables PIM-DM globally for IPv6.
disable
Disables PIM-DM globally for IPv6.
Defaults
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
This command must be set to enable before PIM-DM can run on the switch. In addition, the ip load pim 
command must be executed. Refer to 
Examples
-> ipv6 pim dense-status enable
-> ipv6 pim dense-status disable
Release History
Release 6.3.1; command was introduced.
Related Commands
MIB Objects
alaPimdmGlobalConfig
alaPimdmV6AdminStatus
parameter
default
enable | disable
disable
Enables or disables the PIM protocol on a specific interface.
Dynamically loads PIM to memory.
Displays the status of the various global parameters for the IPv6 
PIM dense mode.