Alcatel-Lucent 6850-48 Reference Guide
Health Monitoring Commands
OmniSwitch CLI Reference Guide
September 2009
page 50-7
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
HealthThreshInfo
healthThreshDeviceRxLimit
healthThreshDeviceTxRxLimit
healthThreshDeviceTempLimit
healthThreshDeviceMemoryLimit
healthThreshDeviceCpuLimit
output definitions
Rx Threshold
The current device input (RX) threshold. This value displays the maxi-
mum percentage of total bandwidth allowed for incoming traffic on the
switch. The total bandwidth is defined as the Ethernet port capacity for
all NI modules currently operating in the switch, in Mbps. For example,
a chassis with 48 100Base-T Ethernet ports installed has a total band-
width of 4800 Mbps. The default value is 80 percent and can be
changed via the
mum percentage of total bandwidth allowed for incoming traffic on the
switch. The total bandwidth is defined as the Ethernet port capacity for
all NI modules currently operating in the switch, in Mbps. For example,
a chassis with 48 100Base-T Ethernet ports installed has a total band-
width of 4800 Mbps. The default value is 80 percent and can be
changed via the
TxRx Threshold
The current device output/input (TX/RX) threshold. This value dis-
plays the maximum percentage of total bandwidth allowed for all
incoming and outgoing traffic. As with the RX threshold described
above, the total bandwidth is defined as the Ethernet port capacity for
all the NI modules currently operating in the switch, in Mbps. The
default value is 80 percent and can be changed via the
plays the maximum percentage of total bandwidth allowed for all
incoming and outgoing traffic. As with the RX threshold described
above, the total bandwidth is defined as the Ethernet port capacity for
all the NI modules currently operating in the switch, in Mbps. The
default value is 80 percent and can be changed via the
command.
Memory Threshold
Displays the current memory usage threshold. Memory usage refers to
the total amount of RAM memory currently used by switch applica-
tions. The default value is 80 percent and can be changed via the
the total amount of RAM memory currently used by switch applica-
tions. The default value is 80 percent and can be changed via the
command.
CPU Threshold
Displays the current CPU usage threshold. CPU usage refers to the total
amount of CPU processor capacity currently used by switch applica-
tions. The default value is 80 percent and can be changed via the
amount of CPU processor capacity currently used by switch applica-
tions. The default value is 80 percent and can be changed via the
command.
Temperature Threshold
Displays the current chassis temperature threshold, in Celsius. The
default value is 50 degrees Celsius and can be changed via the
default value is 50 degrees Celsius and can be changed via the
command.
Configures thresholds for input traffic (RX), output/input traffic
(TX/RX), memory usage, CPU usage, and chassis temperature.
(TX/RX), memory usage, CPU usage, and chassis temperature.