Alcatel-Lucent 6850-48 Reference Guide

QoS Policy Commands

page 53-82

OmniSwitch CLI Reference Guide

Configures an ICMP code value to use for traffic classification.

policy condition condition_name icmpcode code

policy condition condition_name no icmpcode

The name of the condition.

The ICMP code value, in the range 0–255.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

Use the no form of the command to remove an ICMP code value from a condition; however, at least one 
classification parameter must be associated with a condition.

-> policy condition cond12 icmpcode 150

Release 6.1; command was introduced.

Creates a policy condition.

Configures an ICMP type value for traffic classification.

Applies configured QoS and policy settings to the current configuration. 

Shows information about policy conditions configured on the switch.