Alcatel-Lucent 6850-48 Reference Guide

AAA Commands

OmniSwitch CLI Reference Guide

page 58-5

OmniSwitch 6400, 6850, 6855, 9000, 9000E
OmniSwitch 9000E, 6855-U24X; vrf-name parameter supported.

• A host name (or IP address) and a secret are required when configuring a server.

• The server and the backup server must both be RADIUS servers.

• Configuring multiple RADIUS servers is possible, but all RADIUS servers must belong to the same 

VRF instance.

• If the vrf-name parameter is not specified, the default VRF instance is assigned. 

• Use the no form of the command to remove a RADIUS server from the configuration. Only one server 

may be removed at a time. To move the RADIUS servers to a different VRF instance, first remove 
each server from the current VRF instance and then add each server to the new VRF instance.

-> aaa radius-server pubs2 host 10.10.2.1 key wwwtoe timeout 5 vrf-name 

Management-vrf

-> no aaa radius-server pubs2

Release 6.1; command was introduced.
Release 6.4.2; vrf-name parameter introduced.

3

2

1812

1813