Alcatel-Lucent 6850-48 Reference Guide

AAA Commands

page 58-70

OmniSwitch CLI Reference Guide

Configures or modifies an end user profile, which specifies access to command areas. The profile may be 
attached to a customer login user account.

end-user profile name [read-only [area | all]] [read-write [area | all]] [disable [area | all]] 

no end-user profile name

The name of the end-user profile, up to 32 alphanumeric characters. 

Command areas on the switch to which the user is allowed or denied 
access. Areas include physical, vlan-table, basic-ip-routing, ip-routes-
table, mac-filtering-table, spantree.

Areas are disabled for end-user profiles by default.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of the command to delete an end-user profile.

• An end-user profile may not be attached to a user that is already configured with functional privileges.

• If a profile is deleted, but the profile name is still associated with a user, the user will not be able to log 

into the switch.

• Use the end-user profile port-list and end-user profile vlan-range commands to configure ports and 

VLANs to which this profile will have access. By default, new profiles do not allow access to any ports 
or VLANs.

-> end-user profile bsmith read-only basic-ip-routing ip-routes-table

-> no end-user profile bsmith

Release 6.1; command was introduced.