Alcatel-Lucent 6850-48 Reference Guide

AAA Commands

OmniSwitch CLI Reference Guide

page 58-123

Enables or disables the command information mode in the CLI. When this mode is enabled, any command 
entered on the command line will display information about the command rather than executing the 
command.

Enables the debugging command information mode.

Disables the debugging command information mode.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• When the mode is enabled, any command entered will result in output similar to the one shown in the 

Examples section below. Any commands entered when the mode is enabled are not executed. To return 
to normal operating mode, enter debug command-info disable.

• The command information mode is useful when setting privileges for users.

-> debug command-info enable

CLI command info mode on

-> vlan 2

PM family:

VLAN

R/W mode:

WRITE

-> ls

PM family:

SYSTEM

R/W mode:

READ

Release 6.1; command was introduced. 

The partitioned management (PM) command family to which the com-
mand belongs.

Whether the current command is a read-only or a write command.