Alcatel-Lucent 6850-48 Reference Guide
Switch Logging Commands
OmniSwitch CLI Reference Guide
September 2009
page 60-3
swlog swlog-facility-id
Specifies a facility ID that switch logging will include in the priority (PRI) section of the event message.
swlog syslog-facility-id {facility_id | integer}
Syntax Definitions
facility_id
A facility identification keyword. Current facility IDs are listed in the
table below.
table below.
integer
A numerical equivalent value for the facility ID, in the range of 0–23.
Current numeric equivalent values are listed in the table below.
Current numeric equivalent values are listed in the table below.
Defaults
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000
Usage Guidelines
Use the ID name (i.e., system) or the numeric equivalent to specify the facility ID.
Examples
-> swlog syslog-facility-id system
-> swlog syslog-facility-id 3
Release History
Release 6.3.1.R02; command was introduced.
Supported Facility IDs and their Numeric Equivalents
kernel - 0
user - 1
mail - 2
system - 3
sec-auth1-4
syslog - 5
lptr - 6
net-news - 7
UUCP - 8
clock1- 9
sec-auth2 - 10
FTP - 11
user - 1
mail - 2
system - 3
sec-auth1-4
syslog - 5
lptr - 6
net-news - 7
UUCP - 8
clock1- 9
sec-auth2 - 10
FTP - 11
NTP - 12
log-audit - 13
log-alert - 14
clock2 - 15
local0 - 16
local1 - 17
local2 - 18
local3 - 19
local4 - 20
local5 - 21
local6 - 22
local7 - 23
log-audit - 13
log-alert - 14
clock2 - 15
local0 - 16
local1 - 17
local2 - 18
local3 - 19
local4 - 20
local5 - 21
local6 - 22
local7 - 23
parameter
default
facility_id
local0
integer
16