Alcatel-Lucent 6850-48 Reference Guide
SNMP Commands
page 10-28
OmniSwitch CLI Reference Guide
September 2009
show snmp trap filter
Displays the current SNMP trap filter status.
show snmp trap filter
Syntax Definitions
N/A
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
To display a list of traps and their ID numbers, use the
Examples
-> show snmp trap filter
ipAddress : trapId list
-------------------------------------------------------------------------------
199.199.101.200 : 0 1 2 3
199.199.101.201 : no filter
199.199.105.202 : 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
15 16 17 18 19
199.199.101.203 : 20 22 30
199.199.101.204 : no filter
The following is an example of the output display with IPv6 information.
-> show snmp trap filter
ipAddress trapId list
-----------------------------------------+-----------------------------------
172.21.160.32 1 3 4
172.21.160.12 no filter
0300:0000:0000:0000:0211:d8ff:fe47:470b 4 5 6
0300:0000:0000:0000:0211:d8ff:fe47:470c no filter
output definitions
IPAddress
IP address of the SNMP management station that recorded the traps.
Note: OmniSwitch stackable and chassis-based switches support both
IP and IPv6 SNMP stations.
Note: OmniSwitch stackable and chassis-based switches support both
IP and IPv6 SNMP stations.
TrapId List
Identification number for the traps being filtered.