Alcatel-Lucent 6850-48 Reference Guide

Link Aggregation Commands

page 12-18

OmniSwitch CLI Reference Guide

Configures the MAC address of the remote system’s dynamic aggregate group to which the local switch’s 
dynamic aggregate group is attached.

lacp linkagg agg_num partner system id partner_system_id

lacp linkagg agg_num no partner system id

The number corresponding to the dynamic aggregate group on the 
switch.

The MAC address of the remote switch’s dynamic aggregate group in 
the hexadecimal format xx:xx:xx:xx:xx:xx.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove a partner system ID from a dynamic aggregate group.

• The partner_system_id and the partner_system_priority specify the remote system’s priority.

-> lacp linkagg 2 partner system id 00:20:da4:32:81

-> lacp linkagg 2 no partner system id

Release 6.1; command was introduced. 

0