Alcatel-Lucent 6850-48 Reference Guide

Link Aggregation Commands

OmniSwitch CLI Reference Guide

page 12-27

Configures the system ID (i.e., MAC address) for the local port associated with a dynamic aggregate 
group.

lacp agg [ethernet | fastethernet | gigaethernet] slot/port actor system id actor_system_id

lacp agg [ethernet | fastethernet | gigaethernet] slot/port no actor system id 

Documents that the port is 10 Mbps Ethernet.

Documents that the port is 100 Mbps Fast Ethernet.

Documents that the port is Gigabit Ethernet.

The slot number for this aggregate.

The port that the switch will initially use as the Spanning Tree virtual 
port for this aggregate.

The MAC address of the dynamic aggregate group on the switch in the 
hexadecimal format xx:xx:xx:xx:xx:xx.

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove an actor system ID from a slot and port associated with a 

dynamic aggregate group.

• The ethernet, fastethernet, and gigaethernet keywords do not modify a port’s configuration. See 

 for information on CLI commands to configure Ethernet 

ports.

-> lacp 3/1 actor system id 00:20:da:06:ba:d3

-> lacp 3/1 no actor system id

Release 6.1; command was introduced.

0