Alcatel-Lucent 6850-48 Reference Guide

Link Aggregation Commands

OmniSwitch CLI Reference Guide

page 12-43

Configures the priority for a partner port.

lacp agg [ethernet | fastethernet | gigaethernet] slot/port partner admin port priority 
partner_admin_port_priority

lacp agg [ethernet | fastethernet | gigaethernet] slot/port no partner admin port priority

Documents that the port is 10 Mbps Ethernet.

Documents that the port is 100 Mbps Fast Ethernet.

Documents that the port is Gigabit Ethernet.

The slot number for this aggregate.

The port that the switch will initially use as the Spanning Tree virtual 
port for this aggregate.

The priority of the partner port. Possible values are 0–255.

N/A

OmniSwitch 6400, 6850, 6855, 9000, 9000E

• Use the no form of this command to remove a partner_admin_port_priority value from a slot and port 

associated with a dynamic aggregate group.

• The ethernet, fastethernet, and gigaethernet keywords do not modify a port’s configuration. See 

 for information on CLI commands to configure Ethernet 

ports.

-> lacp agg 2/1 partner admin port priority 100

-> lacp agg 2/1 no partner admin port priority

Release 6.1; command was introduced.

0