Alcatel-Lucent 6850-48 Reference Guide
Distributed Spanning Tree Commands
page 15-24
OmniSwitch CLI Reference Guide
September 2009
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
vStpInsTable
vStpInsNumber
vStpInsPriority
vStpInsBridgeAddress
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for changing the Spanning Tree priority for the flat
mode CIST instance or a 1x1 mode VLAN instance.
mode CIST instance or a 1x1 mode VLAN instance.
Explicit command for changing the Spanning Tree priority for an MSTI
when the switch is operating in either the flat or 1x1 mode.
when the switch is operating in either the flat or 1x1 mode.
Explicit command for changing the Spanning Tree priority for a VLAN
instance when the switch is operating in either the flat or 1x1 mode.
instance when the switch is operating in either the flat or 1x1 mode.