Alcatel-Lucent 6850-48 Reference Guide
Distributed Spanning Tree Commands
page 15-62
OmniSwitch CLI Reference Guide
September 2009
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortPriority
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Implicit command for configuring the Spanning Tree priority value for a
port or an aggregate of ports that applies to the specified CIST or VLAN
instance.
port or an aggregate of ports that applies to the specified CIST or VLAN
instance.
Explicit command for configuring the Spanning Tree priority value for a
port or an aggregate of ports for an MSTI when the switch is operating
in either the 1x1 or flat mode.
port or an aggregate of ports for an MSTI when the switch is operating
in either the 1x1 or flat mode.
Explicit command for configuring the Spanning Tree priority value for a
port or an aggregate of ports for a VLAN instance when the switch is
operating in either the 1x1 or flat mode.
port or an aggregate of ports for a VLAN instance when the switch is
operating in either the 1x1 or flat mode.