Alcatel-Lucent 6850-48 Reference Guide
Distributed Spanning Tree Commands
page 15-82
OmniSwitch CLI Reference Guide
September 2009
Examples
-> bridge mode flat
-> bridge 1 4/1 mode forwarding
-> bridge mode 1x1
-> bridge 200 4/1 mode dynamic
-> bridge 300 1/24 mode forwarding
Release History
Release 6.1; command was introduced.
Related Commands
MIB Objects
vStpInsPortTable
vStpInsPortNumber
vStpInsPortManualMode
Selects the Spanning Tree operating mode (flat or 1x1) for the switch.
Explicit command for configuring the Spanning Tree mode on a port or
an aggregate of ports for the CIST instance when the switch is operating
in either the 1x1 or flat mode.
an aggregate of ports for the CIST instance when the switch is operating
in either the 1x1 or flat mode.
Explicit command for configuring the Spanning Tree mode on a port or
an aggregate of ports for a VLAN instance when the switch is operating
in either the 1x1 or flat mode.
an aggregate of ports for a VLAN instance when the switch is operating
in either the 1x1 or flat mode.