Alcatel-Lucent 6850-48 Reference Guide
Source Learning Commands
OmniSwitch CLI Reference Guide
September 2009
page 17-31
show mac-address-table vpls count
Displays Source Learning MAC address table statistics for VPLS service MAC addresses.
show mac-address-table vpls service-id count] [mac-address]
Syntax Definitions
service-id
An existing VPLS ID number.
mac-address
A 48-bit MAC address (aa:bb:cc:dd:ee:ff). Valid addresses are any
non-broadcast, non-multicast MAC, and non-IEEE reserved addresses.
non-broadcast, non-multicast MAC, and non-IEEE reserved addresses.
Defaults
By default, all VPLS addresses are counted.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
Enter a MAC address to display statistics for a specific VPLS service MAC address.
Example
SW-D-> show mac-address-table vpls 1002 count
Mac Address Table Count:
Permanent VPLS Address Count = 1,
Dynamic Learned VPLS Address Count = 13,
Total MAC Address In Use = 14
Release History
Release 6.4.2; command introduced
output definitions
Permanent VPLS Address
Count
Count
The number of static VPLS MAC addresses configured on the switch
with a permanent management status (MAC address is never aged
out).
with a permanent management status (MAC address is never aged
out).
Dynamic Learned VPLS
Address Count
Address Count
The number of VPLS MAC Addresses learned by the switch. These
addresses are not user-configured permanent addresses.
addresses are not user-configured permanent addresses.
Total MAC Address In Use
The total number of MAC addresses (learned and static) that are known
to the switch.
to the switch.