Alcatel-Lucent 6850-48 Reference Guide

VLAN Management Commands

OmniSwitch CLI Reference Guide

page 21-11

• Use the no form of this command to remove an IPX virtual router interface from the VLAN.

• Configuring both an IP and IPX virtual router interface on the same VLAN is allowed. VLAN router 

interfaces, however, are not active until at least one active switch port is assigned to the VLAN.

• In single MAC router mode, a maximum of 4094 VLANs can have IP interfaces and 256 VLANs can 

have IPX router interfaces defined. Note that these limits are subject to the availability of switch 
resources.

-> vlan 10 router ipx 1000590c

-> vlan 200 router ipx 250a active raw timeticks 10

-> vlan 420 router ipx 350a triggered snap timeticks 5

-> vlan 1020 router ipx 2110650d inactive

-> vlan 1020 no router ipx

Release 6.1; command was introduced.

vlanTable

vlanNumber

vlanIpxNet

vlanIpxEncap

vlanIpxRipSapMode

vlanIpxDelayTicks

vlanIpxStatus

Creates a VLAN.

Displays list of existing VLANs.

Displays VLAN port assignments.

Displays router MAC operating mode and VLAN router interface statis-
tics.