Alcatel-Lucent 6850-48 Reference Guide
VLAN Stacking Commands
page 23-40
OmniSwitch CLI Reference Guide
September 2009
show ethernet-service nni
Displays configuration information for VLAN Stacking Network Network Interface (NNI) ports.
show ethernet-services nni [slot/port | linkagg agg_num]
Syntax Definitions
slot/port
The slot number for the module and the physical port number on that
module (e.g., 3/1 specifies port 1 on slot 3).
module (e.g., 3/1 specifies port 1 on slot 3).
agg_num
The link aggregate ID number (0–31).
Defaults
By default, all NNI ports are displayed if a slot/port or link aggregate ID number is not specified.
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
Specify a slot/port or link aggregate ID number to display information for a single slot/port or link
aggregate ID.
aggregate ID.
Examples
-> show ethernet-service nni
Port TPID Legacy BPDU
Transparent Bridging
stp gvrp
--------+--------+-----------------------+-----------------------------------
1/22 0x8100 Disable Disable
Disable
1/23 0x8100 Disable Disable
Disable
- show ethernet-service nni 1/23
Port TPID Legacy BPDU
Transparent Bridging
stp gvrp
--------+--------+-----------------------+-----------------------------------
1/23 0x8100 Disable Disable
Disable
output definitions
Port
The slot/port number or link aggregate ID for the NNI port.
TPID
The vendor TPID value configured for the NNI port.
stp
Whether or not Spanning Tree legacy BPDU processing is enabled for
the NNI port.
the NNI port.
gvrp
Whether or not GVRP legacy BPDU processing is enabled for the NNI
port.
port.
Transparent Bridging
Whether or not transparent bridging is enabled for the NNI port.