Alcatel-Lucent 6850-48 Reference Guide
MPLS LDP Commands
page 24-54
OmniSwitch CLI Reference Guide
September 2009
show router ldp discovery
Displays the discovery status of the LDP Hello adjacencies between the local router and LDP peers.
show router ldp discovery [state {trying | established | down}] [detail]
Syntax Definitions
trying
Displays LDP interfaces that are trying to establish an adjacency with
peers.
peers.
established
Displays LDP interfaces that have established adjacencies with peers.
down
Displays LDP interfaces with adjacencies that are down.
detail
Displays detailed information for LDP hello adjacencies.
Defaults
By default, the discovery status for all the LDP Hello adjacencies is displayed.
Platforms Supported
OmniSwitch 9000E
Usage Guidelines
• Use the state parameter with the trying, established, or down options to display LDP adjacencies that
are in a specific state of discovery.
• Use the detail parameter to display additional discovery information and statistics for the adjacencies.
Examples
->show router ldp discovery
LDP Hello Adjacencies
Interface Name Local Addr Peer Addr AdjType State
--------------------------------+---------------+---------------+-------+------
N/A 10.10.10.5 10.11.0.6 Targ Estab
N/A 10.10.10.5 20.1.2.3 Targ Trying
N/A 10.10.10.5 30.1.2.3 Targ Trying
vlan-30 10.10.10.5 10.11.0.6 Link Estab
No. of Hello Adjacencies: 4
->show router ldp discovery detail
LDP Hello Adjacencies (Detail)
Peer 10.11.0.66
Local Address: 10.11.0.6, Peer Address: 10.11.0.66,
Adjacency Type: Targeted, State: Established,
Up Time: 0d 03:11:09, Hold Time Remaining: 34,
Hello Mesg Recv: 821, Hello Mesg Sent: 819,
Local IP Address: 10.11.0.6, Remote IP Address: 10.11.0.66,
Local Hello Timeout: 45, Remote Hello Timeout: 45,