Alcatel-Lucent 6850-48 Reference Guide
Port Mapping Commands
page 31-10
OmniSwitch CLI Reference Guide
September 2009
show port mapping status
Displays the status of one or more port mapping sessions.
show port mapping [port_mapping_sessionid] status
Syntax definitions
port_mapping_sessionid
The port mapping session ID. Valid range is 1 to 8.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
If you do not specify the port mapping session ID, then the status of all the port mapping sessions will be
displayed.
displayed.
Examples
-> show port mapping status
SessionID Direction Status Unknown Unicast
------------+-----------------+--------------+-----------------
1 uni enable flood
2 uni enable drop
3 bi disable drop
4 bi enable flood
7 bi disable flood
8 bi disable flood
Release History
Release 6.1.2; command was introduced.
Release 6.3.4; unknown unicast field added
Release 6.3.4; unknown unicast field added
output definitions
SessionID
Displays the port mapping session ID.
Direction
Displays the direction of a port mapping session.
Status
Displays the status of a port mapping session.
Unknown unicast
Displays the status of unknown unicast flooding