Alcatel-Lucent 6850-48 Reference Guide
BGP Commands
OmniSwitch CLI Reference Guide
September 2009
page 44-213
show ipv6 bgp network
Displays the status of all the IPv6 BGP networks or a specific IPv6 BGP network.
show ipv6 bgp network [ipv6_address/prefix_length]
Syntax Definitions
ipv6_address
The 128-bit IPv6 address.
/prefix_length
The number of bits that are significant in the IPv6 address (mask)
(3..128).
(3..128).
Defaults
By default, all IPv6 BGP networks and their status will be displayed.
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
Use the ipv6_address/prefix_length parameter to display the status of a specific IPv6 BGP nework.
Examples
show ipv6 bgp network
Network Admin state Oper state
------------------------------------+-----------+----------
2525:500:600::/64 enabled active
show ipv6 bgp network 2525:500:600::/64
Network address = 2525:500:600::/64,
Network admin state = enabled,
Network oper state = active,
Network metric = 0,
Network local preference = 0,
Network community string = <none>
output definitions
Network or Network address
The IPv6 address configured for this local BGP network. This value is
configured through the
configured through the
command.
Admin state or Network admin
state
state
Indicates whether this local BGP network is administratively enabled
or disabled. This value is configured through the
or disabled. This value is configured through the
command.
Oper state or Network oper
state
state
Indicates whether this BGP local network is operationally active or
inactive.
inactive.