Alcatel-Lucent 6850-48 Reference Guide
DVMRP Commands
page 46-18
OmniSwitch CLI Reference Guide
September 2009
ip dvmrp tunnel
Adds or deletes a DVMRP tunnel.
ip dvmrp tunnel {local_name} {remote_address}
no ip dvmrp tunnel {local_name} {remote_address}
Syntax Definitions
local_name
The name of the local router interface.
remote_address
The 32-bit IP address of the remote router interface. The remote router
interface IP address serves as an identifier for the remote end of the
DVMRP tunnel.
interface IP address serves as an identifier for the remote end of the
DVMRP tunnel.
Defaults
N/A
Platforms Supported
OmniSwitch 6850, 6855, 9000, 9000E
Usage Guidelines
• Use the no form of this command to delete a tunnel.
• The local IP address of the tunnel must match the IP address of an existing DVMRP interface.
• Routing (via RIP, OSPF, etc.) must first be set up in order for the remote tunnel endpoint to be
accessible.
Examples
-> ip dvmrp tunnel vlan-2 168.22.2.120
-> no ip dvmrp tunnel vlan-2 168.22.2.120
-Release History
Release 6.1; command was introduced.
Release 6.1.1; local_address and remote_name parameters deprecated.
Release 6.1.1; local_address and remote_name parameters deprecated.