Alcatel-Lucent 6850-48 Reference Guide
Ethernet Port Commands
OmniSwitch CLI Reference Guide
September 2009
page 19-61
show interfaces flow control
Displays interface flow control wait time settings.
show interfaces [slot[/port[-port2]]] flow [control]
Syntax Definitions
slot
Slot number you want to display.
port
Port number of the interface you want to display.
port2
Last port number in a range of ports you want to display.
control
Optional command syntax. It displays the same information as show
interfaces flow.
interfaces flow.
Defaults
N/A
Platforms Supported
OmniSwitch 6400, 6850, 6855, 9000, 9000E
Usage Guidelines
• If no slot/port numbers are entered, flow control wait time settings for all slots/ports on the switch are
displayed.
• You can display a specific interface by entering the slot and port number, a range of ports by entering a
slot and a range of ports, display all interfaces in a slot by entering the slot number, or display all inter-
faces as described above.
faces as described above.
• Note that the show interfaces flow control command is not supported on the OmniSwitch 6855. To
view this type of information for the OmniSwitch 6855, use the
Examples
-> show interfaces 3/20-24 flow
Slot/Port Active Wait time(usec) Cfg-Flow Cfg-Cross
-----------+--------+----------------+--------+-----------
3/20 - 0 Pause MDIX
3/21 - 0 Pause MDIX
3/22 - 0 Pause MDIX
3/23 - 0 Go MDIX
3/24 - 0 Go MDIX
output definitions
Slot/Port
Interface slot and port number
Active
Interface status.
Wait time
Flow control wait time, in microseconds.