Alcatel-Lucent ls 6248 User Guide
Configuring Quality of Service
249
3
Command Attributes
• Policy Name — Contains a list of user-defined policies that can be attached to the
interface.
• Remove — Removes policies.
• Checked — Removes the selected policies.
• Unchecked — Maintains the policies.
Figure 3-129. Policy Table Page
In addition to the fields in the Policy Table Page, the Add QoS Policy Profile Page
contains the following fields:
• Class Map — Selects a class map for the class.
contains the following fields:
• Class Map — Selects a class map for the class.
• Action — Indicates the action performed on incoming packets matching the policy
profile. The possible field values are:
• Trust - Applies the selected Trust settings.
• Set - Redefines the DSCP settings.
• Police — Policer type for the class. Possible values are:
• Aggregate — Configures the class to use a configured aggregate policer
selected from the drop-down menu. An aggregate policer is defined if the policer
is shared with multiple classes. Traffic from two different ports can be configured
for policing purposes. An aggregate policer can be applied to multiple classes
in the same policy map, but cannot be used across different policy maps.
is shared with multiple classes. Traffic from two different ports can be configured
for policing purposes. An aggregate policer can be applied to multiple classes
in the same policy map, but cannot be used across different policy maps.
• Single — Configures the class to use manually configured information rates and