Alcatel-Lucent ls 6248 User Guide
802.1x Commands
281
4
Related Commands
ADVANCED FEATURES
dot1x auth-not-req
The
dot1x auth-not-req
Interface Configuration mode command enables
unauthorized devices access to the VLAN. To disable access to the VLAN, use the
no
form of this command.
Syntax
dot1x auth-not-req
no dot1x auth-not-req
Default Configuration
Access is enabled.
Command Mode
Interface Configuration (VLAN) mode
Command Usage
An access port cannot be a member in an unauthenticated VLAN.
The native VLAN of a trunk port cannot be an unauthenticated VLAN.
For a general port, the PVID can be an unauthenticated VLAN (although only
tagged packets would be accepted in the unauthorized state.)
tagged packets would be accepted in the unauthorized state.)
InvalidEapolFramesRx
The number of EAPOL frames that have been received
by this Authenticator in which the frame type is not
recognized.
EapLengthErrorFramesRx
The number of EAPOL frames that have been received
by this Authenticator in which the Packet Body Length
field is invalid.
LastEapolFrameVersion
The protocol version number carried in the most recently
received EAPOL frame.
LastEapolFrameSource
The source MAC address carried in the most recently
received EAPOL frame.