Alcatel-Lucent ls 6248 User Guide
AAA Commands
291
4
Command Usage
The default and optional list names created with the
aaa authentication enable
command are used with the
enable authentication
command.
The additional methods of authentication are used only if the previous method
returns an error, not if it fails. To ensure that the authentication succeeds even
if all methods return an error, specify
returns an error, not if it fails. To ensure that the authentication succeeds even
if all methods return an error, specify
none
as the final method in the
command line.
All
aaa authentication enable
default requests sent by the device to a RADIUS
or TACACS+ server include the username $enabx$., where x is the requested
privilege level.
privilege level.
Example
The following example sets the enable password for authentication when accessing
higher privilege levels.
higher privilege levels.
Related Commands
aaa authentication dot1x
login authentication
The
login authentication
Line Configuration mode command specifies the login
authentication method list for a remote telnet or console. To return to the default
configuration specified by the
configuration specified by the
aaa authentication login
command, use the
no
form of
this command.
Syntax
login authentication
{
default
| list-name}
no login authentication
Parameters
•
default
— Uses the default list created with the
aaa authentication login
command.
• list-name — Uses the indicated list created with the
aaa authentication
login
command.
Default Setting
Uses the default set with the command
aaa authentication login
.
Command Mode
Line Configuration mode
Console(config)#
aaa authentication enable default enable