Alcatel-Lucent ls 6248 User Guide
Command Line Interface
316
4
bridge multicast address
The
bridge multicast address
Interface Configuration (VLAN) mode command
registers a MAC-layer multicast address in the bridge table and statically adds ports
to the group. To unregister the MAC address, use the
to the group. To unregister the MAC address, use the
no
form of this command.
Syntax
bridge multicast address
{mac-multicast-address}
bridge multicast address
{mac-multicast-address
[
add
|
remove
]
{
ethernet
interface-list |
port-channel
port-channel-number-list}
no bridge multicast address
{mac-multicast-address}
Parameters
•
add
— Adds ports to the group. If no option is specified, this is the default
option.
•
remove
— Removes ports from the group.
• mac-multicast-address — A valid MAC multicast address.
• interface-list — Separate nonconsecutive Ethernet ports with a comma and
• interface-list — Separate nonconsecutive Ethernet ports with a comma and
no spaces; a hyphen is used to designate a range of ports.
• port-channel-number-list — Separate nonconsecutive port-channels with a
comma and no spaces; a hyphen is used to designate a range of ports.
Default Setting
No multicast addresses are defined.
Command Mode
Interface configuration (VLAN) mode
Command Usage
If the command is executed without
add
or
remove
, the command only
registers the group in the bridge database.
Static multicast addresses can only be defined on static VLANs.
Examples
The following example registers the MAC address:
The following example registers the MAC address and adds ports statically.
Console(config)#
interface vlan
8
Console(config-if)#
bridge multicast address
01:00:5e:02:02:03
Console(config)#
interface vlan
8
Console(config-if)#
bridge multicast address
01:00:5e:02:02:03
add
ethernet
1/e1-e9, 2/e2