Alcatel-Lucent ls 6248 User Guide
Clock Commands
351
4
Default Setting
Clock set to UTC.
Command Mode
Global Configuration mode
Command Usage
The system internally keeps time in UTC, so this command is used only for
display purposes and when the time is manually set.
display purposes and when the time is manually set.
Example
The following example sets the timezone to 6 hours difference from UTC.
Related Commands
clock summer-time
The
clock summer-time
Global Configuration mode command configures the
system to automatically switch to summer time (daylight saving time). To configure
the software not to automatically switch to summer time, use the
the software not to automatically switch to summer time, use the
no
form of this
command.
Syntax
clock summer-time recurring
{
usa
|
eu
| {week day month hh:mm week day
month hh:mm}} [
offset
offset] [
zone
acronym]
clock summer-time date
date month year hh:mm date month year hh:mm
[
offset
offset] [
zone
acronym]
clock summer-time date
month date year hh:mm month date year hh:mm
[
offset
offset] [
zone
acronym]
no clock summer-time recurring
Parameters
•
recurring
— Indicates that summer time should start and end on the
corresponding specified days every year.
•
date
— Indicates that summer time should start on the first specific date
listed in the command and end on the second specific date in the command.
•
usa
— The summer time rules are the United States rules.
•
eu
— The summer time rules are the European Union rules.
• week — Week of the month. (Range: 1 - 5,
first
,
last
)
• day — Day of the week (Range: first three letters by name, like
sun
)
• date — Date of the month. (Range:1 - 31)
Console(config)
#
clock timezone
-6 zone CST