Alcatel-Lucent ls 6248 User Guide
Command Line Interface
448
4
Parameters
• interface-number — A valid Ethernet port number.
• vlan-id — A valid VLAN number.
• port-channel-number — A valid port-channel number.
• ip-address — A valid source IP address.
• mask — A valid network mask of the source IP address.
•
• vlan-id — A valid VLAN number.
• port-channel-number — A valid port-channel number.
• ip-address — A valid source IP address.
• mask — A valid network mask of the source IP address.
•
mask
prefix-length — Specifies the number of bits that comprise the source
IP address prefix. The prefix length must be preceded by a forward slash
(/). (Range: 0-32)
(/). (Range: 0-32)
• service — Service type. Possible values:
telnet
,
ssh
,
http,
https
and
snmp
.
Default Setting
This command has no default configuration.
Command Mode
Management Access-list Configuration mode
Command Usage
Rules with Ethernet, VLAN and port-channel parameters are valid only if an IP
address is defined on the appropriate interface.
address is defined on the appropriate interface.
The system supports up to 128 management access rules.
Example
The following example denies all ports in the access list called mlist.
Related Commands
management access-class
The
management access-class
Global Configuration mode command restricts
management connections by defining the active management access list. To disable
this restriction, use the
this restriction, use the
no
form of this command.
Syntax
management access-class
{
console-only
| name}
no management access-class
Parameters
•
console-only
— Indicates that the device can be managed only from the
console.
• name — Specifies the name of the access list to be used.
Console(config)#
management access-list
mlist
Console(config-macl)#
deny