Alcatel-Lucent ls 6248 User Guide

Software Download and Reboot

25

2

To configure an initial HTTP password, enter the following commands:

To configure an initial HTTPS password, enter the following commands:

Enter the following commands once when configuring to use a console, a Telnet, or 
an SSH session in order to use an HTTPS session.

In the Web browser enable SSL 2.0 or greater for the content of the page to appear.

When initially enabling an http or https session, enter admin for user name and 
user1

 for password.

HTTP and HTTPS services require level 15 access and connect directly to the 
configuration level access.

This section contains instructions for downloading device software (system and boot 
images) using XModem, which is a data transfer protocol for updating back-up 
configuration files.

To download a boot file using XModem:

1.

Enter the command “xmodem:boot”. The switch is ready to receive the file via 
the XModem protocol and displays text similar to the following:

2.

Specify the path of the source file within 20 seconds. If the path is not specified 
within 20 seconds, the command times out.

To download a software image file using XModem:

1.

Enter the command “xmodem:image”. The switch is ready to receive the file via 

Console(config)# 

Console(config)# 

 user1 

 15

Console(config)# 

Console(config)# 

 admin 

 user1 

 15

Console(config)# c

Console(config)# 

Console# copy xmodem:boot

Please download program using XMODEM.
console#