Alcatel-Lucent ls 6248 User Guide

QoS Commands

493

4

The following table describes the significant fields shown in the example:

The show qos map Global Configuration mode command displays the QoS 
mapping information.

show qos map [dscp-queue  | dscp-dp | tcp-port-queue |  udp-port-queue  | 
policed-dscp | dscp-mutation | service-type-cos | service-type-dscp] 

• dscp-queue — Displays the DSCP to queue map.
• dscp-dp — Displays the DSCP to Drop Precedence map.

Power

The operational status of the inline power sourcing equipment. 

Nominal Power

The nominal power of the inline power sourcing equipment in Watts.

Consumed Power

Measured usage power in Watts.

Usage Threshold

The usage threshold expressed in percents for comparing the measured 

power and initiating an alarm if threshold is exceeded.

Traps

Indicates if inline power traps are enabled. 

Port

The Ethernet port number.

Powered Device

Description of the powered device type. 

State

Indicates if the port is enabled to provide power. Can be: Auto or Never.

Priority

The priority of the port from the point of view of inline power management. 

Can be: Critical, High or Low.

Status

Describes the inline power operational status of the port. Can be: On, Off, 

Test-Fail, Testing, Searching or Fault.

Classification

The power consumption range of the powered device. Can be: 0.44 – 12.95, 

0.44 – 3.84, 3.84 – 6.49 or 6.49 – 12.95.

Overload Counter

Counts the number of overload conditions that has been detected.

Short Counter

Counts the number of short conditions that has been detected.

Denied Counter

Counts the number of times power has been denied.

Absent Counter

Counts the number of times power has been removed because powered 

device dropout was detected. 

Invalid Signature 

Counter

Counts the number of times an invalid signature of a powered device was 

detected.