Alcatel-Lucent ls 6248 User Guide
Command Line Interface
684
4
show interfaces switchport
The
show interfaces switchport
Privileged EXEC mode command displays the
switchport configuration.
Syntax
show interfaces switchport {ethernet
interface |
port-channel
port-channel-number}
Parameters
• interface — A valid Ethernet port number.
• port-channel-number — A valid port-channel number.
• port-channel-number — A valid port-channel number.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
Example
The following example displays the switchport configuration for Ethernet port 1/e1.
Console#
show interface switchport ethernet
1/e1
Port 1/e1:
VLAN Membership mode: General
Operating parameters:
PVID: 1 (default)
Ingress Filtering: Enabled
Acceptable Frame Type: All
GVRP status: Enabled
Protected: Enabled, Uplink is 1/e9.
Port 1/e1 is member in:
Vlan
Name
Egress rule
Type
----
-------
-----------
-------
1
default
untagged
System
8
VLAN008
tagged
Dynamic
11
VLAN011
tagged
Static