Alcatel-Lucent ls 6248 User Guide
Managing System Files
61
3
Figure 3-16. Clock Time Zone Page
CLI - The following is an example of the system clock commands:
Managing System Files
You can upload/download firmware to or from a TFTP server. By saving runtime
code to a file on a TFTP server, that file can later be downloaded to the switch to
restore operation. You can set the switch to use new firmware without overwriting
the previous version.
The system run-time software and configuration information is kept in files which
may be saved, copied, uploaded for host-based storage and manipulation. The
system files include:
• Boot Files — The system uses two identical copies of the boot image, stored in
code to a file on a TFTP server, that file can later be downloaded to the switch to
restore operation. You can set the switch to use new firmware without overwriting
the previous version.
The system run-time software and configuration information is kept in files which
may be saved, copied, uploaded for host-based storage and manipulation. The
system files include:
• Boot Files — The system uses two identical copies of the boot image, stored in
flash. The first copy is used when the system comes up.
• Software Image Files — two images are stored. The device boots from one, and
the other is used as a redundant backup.
Console# clock set 13:32:00 7 Mar 2002
Console# configure
Console(config)# clock source sntp
Console(config)# clock timezone -6 zone CST
4-350
Console(config)# clock summer-time recurring first sun apr 2:00 last sun
Console(config)# clock summer-time recurring first sun apr 2:00 last sun
oct 2:00