Franklin tpq-200 User Guide
4
Getting Started
This product uses four AAA batteries. The batter-
ies should be changed when the screen contrast
is too light even after adjustment.
ies should be changed when the screen contrast
is too light even after adjustment.
Warning! If the batteries completely lose power,
all the information stored in the phone list will be
permanently lost. Furthermore, any time that you
change the batteries, you risk losing all your
phone list information, so always keep
all the information stored in the phone list will be
permanently lost. Furthermore, any time that you
change the batteries, you risk losing all your
phone list information, so always keep
written
copies of your phone list information.
1. Remove the battery compartment cover on
the back of the unit.
2. Install four new AAA batteries.
3. Press
3. Press
ON/OFF
.
A brief demonstration appears.
4. Press
CLEAR
to stop the demonstration.
5. Press
or
to adjust the screen contrast.
Note: You can only adjust screen contrast
when
when
ENTER a word
is on the screen.
✓
To Disable or Re-enable the Demo
You probably do not want to view the demon-
stration every time you use this product. To
disable the demonstration, first press
stration every time you use this product. To
disable the demonstration, first press
THES
,
type
✽✽
d
, and then press
ENTER
=
. To re-enable
it, do the same.