Fujitsu NH570 User Guide

78 - Troubleshooting

You have installed a USB 
device. Your notebook does 
not recognize the device, or 
the device does not seem 
to work properly.
(continued)

The device may have 
been installed while an 
application was running, 
so your notebook is not 
aware of its installation.

Close the application and restart your notebook.

Your device may not 
have the correct soft-
ware driver active.

See your software documentation and activate the correct driver.

A card inserted in the 
ExpressCard slot does not 
work or is locking up the 
system.

The card is not properly 
installed.

Remove and re-install the card. See “Using ExpressCards™” on 
page 62.

The card may have 
been installed while an 
application was running, 
so your notebook is not 
aware of its installation.

Close the application and restart your notebook.

Your software may not 
have the correct soft-
ware driver active.

See your software documentation and activate the correct driver.

You may have the 
wrong I/O address 
selected for your card.

See your ExpressCard documentation to determine the required 
I/O address. Change the settings in Device Manager.

Your card and another 
device are assigned the 
same I/O address.

Check all I/O addresses located within the Device Manager and 
any other installed hardware or software to make sure there are 
no duplications.

You turn on the system and 
nothing seems to happen.

The Power adapter (AC 
or auto/airline) is faulty.

Try a different Power adapter or install a charged optional second 
battery.