Fujitsu s300 Quick Setup Guide
23
2.
Change the scanning settings
on the [ScanSnap Manager -
Scan and Save Settings]
dialog box.
You can update your last-saved
settings for scanning when
[SCAN Button Settings] is
selected.
on the [ScanSnap Manager -
Scan and Save Settings]
dialog box.
You can update your last-saved
settings for scanning when
[SCAN Button Settings] is
selected.
There are six tabs used to
configure the scan options at
maximum (The number of tabs
displayed and items that can be
configured vary depending on
the interacting application and
the Operation mode.)
configure the scan options at
maximum (The number of tabs
displayed and items that can be
configured vary depending on
the interacting application and
the Operation mode.)
3.
Click the [OK] button to finish
the configuration.
the configuration.
⇒
The new settings are enabled.
3.3 Scanning Office Documents
This section describes how to scan the documents generally used in most offices. The
ScanSnap can scan the documents in various sizes.
ScanSnap can scan the documents in various sizes.
1.
Pull up the Paper chute guide and open the extension in the order given,
and load the documents onto the scanner.
and load the documents onto the scanner.
For details of how to scan documents, refer to "Chapter 3 Using the
ScanSnap" of "ScanSnap S300 Operator’s Guide."
ScanSnap" of "ScanSnap S300 Operator’s Guide."
ABCDEFG
ABCDEFG
1234567890
1234567890
Set the paper face-
down with its top
margin towards the
scanning direction.
Scanning
direction
direction
[SCAN] button
Paper chute guide
Side
guide
guide