Fujitsu s300 Service Manual
2.1 Installing the Supplied Programs
ScanSnap S300 Operator's Guide
7
Connecting t
he ScanSnap
2
■ Free disk space
• ScanSnap Manager
350 MB
• ScanSnap Organizer
370 MB
• CardMinder
200 MB
2. Make sure that the ScanSnap is not yet connected to your computer.
3. Start your computer.
Log on as a user with "Computer administrator" privileges.
4. Exit all programs and close all windows.
■ Installing Supplied Programs
Install the supplied programs from the "ScanSnap Setup CD-ROM" that comes with this scanner.
They are:
They are:
• ScanSnap Manager
• ScanSnap Organizer
• CardMinder
<Installing ScanSnap Manager, ScanSnap Organizer, and CardMinder>
Following the procedure below, install ScanSnap Manager, ScanSnap Organizer, and
CardMinder.
CardMinder.
ATTENTION
•
The ScanSnap may not function if it is connected to the USB port on the
keyboard or the monitor.
keyboard or the monitor.
•
If you are using a commercially available USB hub, use a powered hub
equipped with an AC adapter.
equipped with an AC adapter.
•
To connect the ScanSnap with USB 2.0, it is required that the USB port and
the hub be compliant with USB 2.0. When you connect the ScanSnap with
USB 1.1 port, scanning speed may slow down. Therefore, use the USB 2.0
compatible one if your computer has the USB 2.0 compatible port.
the hub be compliant with USB 2.0. When you connect the ScanSnap with
USB 1.1 port, scanning speed may slow down. Therefore, use the USB 2.0
compatible one if your computer has the USB 2.0 compatible port.
•
If the CPU and memory do not meet the required specifications, scanning
speed will slow down.
speed will slow down.