Sony kdl-46xbr10 User Guide

All models can be mounted to a wall using the Wall-Mount Bracket (not supplied) out of the box 
as packaged. 

Prepare the monitor for the Wall-Mount Bracket before making cable connections.

Sony strongly recommends that you use the Wall-Mount Bracket model designed for your 
monitor (see page 49) and that wall-mounting of your monitor should be performed by a 
Sony dealer or licensed contractor.

•

Follow the instruction guide provided with the Wall-Mount Bracket for your model. You 
may also need to refer to the online Reference Book for additional information for your 
unit model. Sufficient expertise is required in installing this monitor, especially to 
determine the strength of the wall for withstanding the monitor’s weight.

•

Be sure to use the screws supplied with the Wall-Mount Bracket when attaching the 
mounting hooks to the monitor. (Do not use the screws that are intended for the Table-Top 
Stand attachment.)
The supplied M6 screws are designed so that they are 8 mm to 12 mm in length when 
measured from the attaching surface of the mounting hook.
Use of screws other than those supplied with the bracket may result in internal damage to 
the monitor or cause it to fall, etc.

•

Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready 
to attach the Table-Top Stand. Keep the screws away from small children. When you are 
using the Table-Top Stand, be sure to read page 19.

8-12 mm

Screw M6 × 16 (supplied with the Wall-Mount Bracket)

Mounting Hook

Rear of the monitor

Spacer (black)

8-12 mm

Screw M6 × 20 (supplied with the monitor)

Mounting Hook

Rear of the monitor

Spacer (silver)